|
Vrolet - F3P V3 "Feather"
The new V3 Vrolet "Feather" is here!
Designer and Champion pilot, Jason Noll continues to improve his legendary
design. V3 changes include two new color schemes, aerodynamic and
structural changes to improve overall flight presentation.
The V2 kit shocked everyone during the 2007
indoor season. The V3 is even better!!!
Fancy Foam Models invented the milled out "lightened"
foamy. We were also the first company to figure out how to mass
produce it. The ENTIRE airframe has been lightened (see photo below).
By milling out the depron, we remove more than an ounce of weight vs. a
normal airframe. The milling will remove the graphics from the bottom
of the wings and one side of the fuselage. Because we remove so much foam, the airframe is very
fragile. This is a high end competition plane and will not hold up to
a mid-air collision or a hard crash. It will however fly so slow and
precise that you'll have an automatic advantage over the competition.
It is comes with the revolutionary "Noll CV" drag plates for constant
velocity in all attitudes. The graphics only add 5 grams (.2 oz) to
the weight of the plane. If you are ready to
take precision aerobatics indoors, this is your plane! The F3P Feather cost
much more than any other airframe because of the milling time and
foam cost.
Kit Contents:
Complete Vrolet F3P kit precut and glue ready. Printed instruction
booklet. Comes with over 25 feet of carbon fiber strips and pushrods, laser
cut plywood control horns, hinge tape, landing gear with wheels, plywood
firewall.
Combo Kit Contents:
AXI 2203-46 outrunner, Thunderbird 9 speed control, FlightPower 2 cell - 350 battery,
Hitec Micro receiver with crystal (or Spectrum 6100),
2 Dymond 4.7 micro servos & one Eflight S75 servo, GWS 9 x 5 prop, Complete
Vrolet kit precut and glue ready. Printed instruction
booklet. Comes with over 25 feet of carbon fiber strips and pushrods, laser cut plywood
control horns, hinge tape, landing gear with wheels, plywood firewall. (Transmitter Not Included)
Wing Span: 33", Wing area 425 sq. in. Weight ready
to fly 4.5 to 5.5 oz.
|
Version A - White Turtledeck
Version B - Red Turtledeck
Click photo for a close up view of
3 mm Depron milled to less than 1 mm in pocket areas. Another Fancy
Foam Models innovation!
|
