Need to ask a question?  Contact us, We answer fast! fancyfoam@cox.net 

Phone Order Hours 8am - 5 pm CST Call 620-442-0111

All major credit cards accepted. We also accept money orders and

No personal checks please. 

Foam Safe Accelerator 2 oz.

100% foam safe CA kicker.  2 oz. spray bottle.  You must use this with foam safe CA if you want the glue to cure.  Made by Bob Smith Industries.  This is the glue we use on our personal indoor foamies. 

Foam Safe CA, Thin, 1/2 oz.

100% foam safe thin CA glue.  1/2 oz. bottle.  You must use this with foam safe CA kicker if you want the glue to cure.  Made by Bob Smith Industries.  This is the glue we use on our personal indoor foamies.  Use the thin for building indoor foamies.  This is the lightest glue.

Foam Safe CA, Med, 1/2 oz.

100% foam safe thin CA glue.  1/2 oz. bottle.  You must use this with foam safe CA kicker if you want the glue to cure.  Made by Bob Smith Industries.  Use this glue for repairs. It is gap filling, so it is thicker and heavier.

Fancy Foam Hinge Tape 1"

This is the best in hinge tape material.  It is 1" wide x 5 yards long.  One roll can do two kits.  This tape will stick over any paint and will last as long as the plane does.  It is the same tape sold under the "Dub_ _" label, except we sell it for much less.  Also known as "Blenderm" tape.

This is the best in hinge tape material.  It is 1/2" wide x 5 yards long.  One roll can do two kits.  This tape will stick over any paint and will last as long as the plane does. Also known as "Blenderm" tape.  the 1/2" is great for indoor planes.

This is the landing gear kit for our monoplanes.  With the unique leaf spring action of the four flat carbon rods, these gear are strong, yet easy on the airframe.  They secure directly to the wing spar and don't rely on one thickness of fuselage foam like some other kits do.  This kit can be added during airplane construction or to a plane that is already built.  They come with lightweight 1 1/2" wheels, carbon sticks, mount plate, axles and instructions.  Adds 1/2 oz to the airplane and they don't change the center of gravity.  Requires one notch in the fuselage and a little Gorilla Glue to secure it to the plane.  Click HERE to watch the video of our crash test.

Maxx EPW150 1 1/2" wheels

These are the wheel that we pack with our landing gear kits.  They weigh almost nothing.  These are the wheels for our 13 oz. kits.

Maxx EPW125 1 1/4" wheels

These are the wheel that we pack with our mini kits.  They weigh almost nothing.  These are the wheels for our 5 oz. kits.

Replacement Tail Parts

Did you get a little carried away with the glue on the tail?  This kit gives you new foam, carbon rod and aluminum sleeves for the tail on your kit.  Remember, it just takes a little glue to make a great joint. Please enter the model that you need the parts for.  WHITE ONLY!